If macOS’s Migration Assistant fails, here are other ways to move accounts

This past Christmas, my kids received new Mac laptops. We
managed to keep their previous computers working for seven
years, but these new Macs will see my kids through to college
and maybe beyond. New Macs meant that we had to move all their
files from the older computers to the new ones.

The old machines both had macOS High Sierra installed, and the
new ones have the current macOS, Mojave. Following Apple’s
instructions, I started migration on both older systems to both
newer ones. (It made for a lot of smiles and laughs as family
members passed through the room with four Macs all chugging
away at once.)

Both computers gave errors at the end of multi-hour migrations,
though one pair of computers appeared to have fully transferred
data. The other pair did not; it seemed to have transferred
apps and system preferences, but left out the main user. This
may have been due to that user having parental controls set,
though Migration Assistant doesn’t warn of that being a
problem, nor is there a mention in any support notes from

In my experience with Migration Assistant over the years, this
kind of inexplicable problem has become ever rarer. I tried
three different methods to shift that user directory over, and
only the third (and very technical one) worked.

Delete and archive the account

The most obvious way to move the account was to use the Users &
Groups preference pane’s option to remove an account, but
archive its contents. First ensure you have a backup of the
older computer. Then follow these steps on that computer. (Note
that for later migration methods, you’ll return to use some of
these steps, too.)

mac911 delete account archive

You can turn a user’s directory into a disk image by
choosing to delete the user.

  1. Open the Users & Groups preference pane.
  2. Click the log and enter details for an administrative user.
  3. Select the account in the user list.
  4. Click the – (minus) sign.
  5. Make sure the first option is selected, Save the Home
    Folder in a Disk Image. Then click Delete User.
  6. This should prompt you to save the user’s directory, and
    then macOS will copy it to that disk image.
  7. Copy the disk image file via the network or an external
    drive to the newer Mac.
  8. Mount the disk image by double clicking it.
  9. Create a new folder in the Users directory with the name
    you want to use for the new account.
  10. Copy the entire contents of the disk image into that new
    directory. (You may have to authenticate copying in both steps
    9 and 10.)
  11. When complete, eject the disk image.
  12. In Users & Groups, click + (plus) to
    create a new account. Make sure the Account Name is different
    from the folder you created in Users in step 9, as the Account
    Name is used to create the name of the folder in the Users

  13. As described in this recent article
    , you “repoint” the
    home directory to the directory you just copied. (In brief,
    Control-click the new user name, click Choose to the
    right of Home Directory, and select that new directory. Click
  14. Now you need to fix permissions. In the Finder, select the
    new user’s folder in the Users directory and choose
    File > Get Info.
  15. Under Sharing & Permissions, click the lock icon
    and enter an administrative account’s password.
  16. Click the + sign and pick the just-created user that should
    become the owner of this directory and then click Select.
  17. Set that user to Read & Write under the
    Privilege column.
  18. Now select the gear icon and choose “Make account
    the Owner.”
  19. Finally, select the gear icon and choose Apply to
    Enclosed Items
    and click OK. This may take a
    moment or several minutes.

Now you’re complete. I’d make sure fast-user switching was
enabled (in Users & Groups > Login
), and then attempt to log into the user you just
changed the directory for. If you can’t log in, you may need to
take one of the steps below.

For me, this option failed after step 6, with macOS refusing to
delete and archive the account. I moved on to try to the next

Use Disk Utility to archive the user folder as a disk image

Disk Utility can create a disk image from a folder, and this
seemed like the logical next step.

  1. Launch Disk Utility.
  2. Choose File > New Image > Image
    from Folder
  3. Choose the user directory.
  4. Save the disk image and then proceed at step 7 above.

Again, this failed for me. Disk Utility was unable to create
the disk image, so I proceeded to the next option.

Copy via a network connection

I thought perhaps the user directory could simply be copied
over, bypassing the archive and disk image states.

  1. On the new machine, enable file sharing in the Sharing
    preference pane by checking the File Sharing box.
  2. On the old machine in the Finder, choose Go >
    Network and double-click the new computer’s name.
  3. Click Connect As in the window’s upper right and
    enter an administrative user and password.
  4. Mount the main volume by double clicking it.
  5. Drag the user directory you want to copy from the old
    machine to Users > Shared on the new
    computer. This bypasses permissions issues in copying.
  6. When complete, on the new machine hold down the Command key
    and drag the user directory into the main Users folder. You
    will have to authenticate this “move” operation with an
    administrative password. (If the old account matches an account
    that already exists on the new machine, rename the folder you
    copied to the Shared directory to something else before you
    move it.)
  7. Now proceed at step 12 above.

Once again, sadly, as Christmas Day progressed, this option
failed for me as well. I proceeded to the most-technical

Use command-line tools to copy all files

Warning! It’s easy to make errors at the
command line that could cause problems with your Mac, including
requiring a full restore of the system and all your files. Make
a complete backup and follow steps below exactly. If you’re not
confident, don’t use this method.

This is essentially a “recipe” that you can follow with careful
attention to detail in which you substitute in your own user
account names and folder names.

Here’s how it works. An old Unix command called
tar (for “tape archive”—it’s that old)
creates ZIP-like archives of files and folders that exactly
capture the directory hierarchy. Just as with ZIP, when you
extract an archive, the structure is reproduced.

Instead of creating an archive on disk, you can use tar to send
the archive across a network connection where it’s extracted
live as each file is added. It’s a kind of bizarre Unix copy
operation that’s often more reliable and possible in cases
where others fail.

To carry this out, start steps 1 to 4 under “Copy via a network

Now, make sure you know these four pieces of information:

  • The directory name on the old machine in the Users folder.
    Let’s call this the OLDACCOUNT.
  • The directory name you created on the new machine in the
    Users folder. Let’s call this the NEWACCOUNT.
  • The Account Name as shown in the Users & Groups preference
    pane’s Advanced Options (see above for finding that screen).
    Call that SHORTNAME.
  • The destination drive name as mounted on your old computer.
    Enter ls -l /Volumes in the Terminal, and you get
    a list of all internal, external, and network drives. Note the
    full name of your destination drive. Let’s call that,
mac911 list terminal volumes dir

In the Terminal, view a list of internal, external, and
network drives.

You’re finally ready to proceed. Enter these two commands on
the old computer with all those substitutions, ending each by
pressing Return. Also make sure you have a single straight
quote around the paths to prevent errors that can occur when
spaces are in the names of users, volumes, or paths. (This is
all one line.)

cd '/Users/OLDACCOUNT' sudo
tar cvf - . | (cd
tar xf -)

With this last operation, you will likely have to enter the
password for the account you’re using. (sudo means
“run this command as if you’re the ‘superuser,’ or most
important account on this computer.”)

So if I’m copying my glennfleishman user directory
on my old computer to a glenn account on my new
computer, and the startup drive on the new computer is named
Amusing Drive Name, those commands would look like
this. (The line beginning sudo is all one line.)

cd '/Users/glennfleishman'

sudo tar cvf - . | (cd '/Volumes/Amusing Drive
Name/Users/Shared/glenn'; tar xf -)

(For those interested, the commands mean: “Change directory to
the glennfleishman location. Create a tape archive
that passes the contents along to the next program in a chain
instead of writing to a file on disk. For each file, first
change director to the destination networked drive’s directory,
then extract the archived file into the correct hierarchical

This can take a long while, even with fast Wi-Fi or Ethernet,
and the v option in that first tar in
the second line stands for “verbose”: it will display a single
line for every one of likely 10,000s to 100,000s of files

When this is all complete, you need to move the user directory
on the new machine, as in step 6 under “Copy via a network
connection”: Hold down the Command key and drag the user
directory into the main Users folder (ensuring first it’s not
named the same as a folder already in Users), and enter a
password if required.

You can then continue to proceed at step 12 in the first method

While steps 14 to 19 for changing permissions should work, it’s
possible you’ll encounter a problem because of how the files
are copied. In that case, you can use Terminal on the new
computer to solve the problem. (Why is “wheel” in there? It’s a
standard Unix group name used for administrative purposes.)

  1. On your new computer, launch Terminal.
  2. At the command line enter
    sudo chown -R SHORTNAME:wheel
  3. Enter a password if prompted to proceed.

In the case of my example above, that would look like

sudo chown -R glenn:wheel /Users/glenn

Ask Mac 911

We’ve compiled a list of the questions we get asked most
frequently along with answers and links to columns:
read our super FAQ
to see if your question is covered. If
not, we’re always looking for new problems to solve! Email
yours to [email protected] including screen captures as
appropriate, and whether you want your full name used. Every
question won’t be answered, we don’t reply to email, and we
cannot provide direct troubleshooting advice.

%d bloggers like this: